With the continuous development of our machinery industry, linear circular rails are more and more widely used in our machinery industry. The quality of linear circular rails determines the working efficiency and service life of our machinery, so how should we measure the quality of a guide rail? Is it good or bad? What is the standard of measurement? Let's take a look together!
A good guide rail will not have a lot of noise. The level of noise is one of the criteria for judging the quality of linear circular rails. Many manufacturers also attract buyers with the selling point of no noise. So is the sound of the linear circular track when it is running because of a malfunction?
If the linear circular track makes a sharp sound when it is running, if it makes a sharp hiss, squeak, and other irregular sounds and other irregular sounds, it generally means that the linear bearing is running poorly. situation. The sharp sound may be caused by improper lubrication.
Secondly, improper linear bearing clearance can also cause metal noise. Some domestically made guide rails have relatively large clearances, and even manual swings can be felt. Moreover, the clearance of some sliders may be too large due to improper installation. It will cause noise during operation. Therefore, we usually recommend not only to use good quality guide rails, but also to strictly follow the correct method during installation.
The linear circular rail will emit a very low whine even when it is in a good operating condition. Therefore, the machine builder or maintenance engineer must be highly alert to the fault signal of the linear bearing. The noise is still normal. The sound must be distinguishable by hearing.
The sound made by the linear circular rail in the process of operation will also require us to carefully distinguish. If it is a malfunction, we must deal with it in time.
Contact US Now
E-mail: sales@gyballscrew.com Tel(WhatsApp): plus 86 17769816967
seller@gyballscrew.com plus 86 17769815516
saleChen@gyballscrew.com plus 86 15325179771