The linear module is an automated mechanical instrument. It is not as flexible as a manual machine. Therefore, it is necessary to master the change of its accuracy in practical work. The linear slide table requires the use of the above several methods of measuring the linear module. At the same time, it is necessary to select a linear module with guaranteed quality to maximize the basic accuracy of the linear module. The planning style is useful. For industrial production, there is no need to plan the linear module to be the same as a piece of art. It only needs to be useful. On top of the useful foundation, it is necessary to reduce the use of space to the greatest extent. In other words, to achieve compact planning, the overall volume of the linear module is moderate, and the carrying capacity must be large enough on top of these foundations.
The working parallelism is placed on the platform of the high-quality and durable linear module, and the test indicator is used to measure and inspect the limit of the movable scale of the inner slider. The maximum difference of the reading within the limit of the movable scale of the servo electric cylinder is the measured value. . High precision and strong bearing capacity. Precision should be one of the characteristics of mechanical real-line modules. Due to the comparison of machinery and labor, a big advantage is that the precision is much higher and it will not follow time. The precision changes too much due to the passage of time, so as to ensure that it can have a good effect on the industrial assembly line and reduce the cost of manpower. The linear motor and the bearing capacity can also be customized according to the different specific conditions of each enterprise. If the weight of the product that needs to pass through the linear module is relatively large, then the material with better bearing capacity can be selected for production. Positioning accuracy linear module accuracy measurement takes its maximum stroke as the reference length, and then uses the absolute value of the maximum error between the distance from the reference azimuth to the actual movement and the command value to indicate.
Multi-joint manipulator: sensitive action, small inertia of motion, strong versatility, micro-electric steel can grasp the workpiece close to the machine base, and can bypass the obstacles between the machine body and the working machine to perform operations. The sensitivity, positioning accuracy and working space of the articulated arm have put forward higher and higher requirements. But the linear module is just a device, and the oscillations produced by long-term work will also change its accuracy. Therefore, the single-axis arm needs to pay attention to whether its accuracy is still set in the first place. It can be used continuously for a cycle when the air is cut off, and an alarm will be issued to remind the operator. The orthogonal manipulator cooperates with various non-standard fixtures, and the soft cable type power manipulator can complete the lifting of various shapes of workpieces. The installation method can be fixed on the ground or suspended and used, but the guide rail type cannot be used.
